Description
Features
1. Enclosure is cast with aluminum alloy, surface is sprayed with plastic by high pressure static, fine outline.
2. High-energy impact resistance toughen glass, outer fasteners are made of stainless steel.
3. Silicone rubber seal, high temperature resistant, anti-aging, has a good waterproof, dustproof performance;
4. The structure is LED PV modules of integrated direct type, and the main chamber and wiring chamber are respective; Only wiring chamber open when wiring, so the installation is convenient and safe;
5. Module structure, assembly according to requirements;
6. Several LED are arranged logically, high-efficient, with the luminescent effliciency≥140 lm/W, CRI≥1270, and long service time over 50,000 hours, and can be long-term used without maintenance;
7. Use the optical lens, even illumination.
8. Input with wide voltage(180-265V), output with constant power, the power factor≥0.98, and have the protective of constant voltage, current, over current, open circuit, short circuit, andfunction surge-preventing, etc;
9. Special Angle adjusting mechanism which according to customer requirements, adjust the irradiation Angle, can be installed in horizontal or wall lamp body;
10. Wiring with cable.
Main technical parameters
| Rated voltage(V) | Light source power(W) | Degree of protection | Erosion-proof class | Ex-mark | Cable outer dia.(mm) | Inlet thread |
| 220 230* 240* | 30, 45, 60, 90, 100, 120, 135, 150, 180, 200, 225, 250 | IP66 | WF1, WF2* | Ex d eⅡB T6 Gb | φ10～φ14 | M25×1.5 |
| Ex d eⅡC T6 Gb | ||||||
| Ex tD A21 IP66 T80℃ |
*: Please notice when ordering.
Outline & installation dimensions
| Installation method | Support type | Road type | |
| Size | A | A | |
| Power | |||
| 30W、45W | 265 | 269 | |
| 60W、90W、100W | 418 | 422 | |
| 120W、135W、150W | 553 | 575 | |
| 180W、200W | 693 | 729 | |
| 225W、250W | 847 | 883 | |
Reviews
There are no reviews yet.